Initializing The Network Settings Of The Machine - Canon MX870 Series User Manual

>
Advanced Guide
About Network Communication
Settings of the Machine

Initializing the Network Settings of the Machine

Important
Note that initialization erases all network settings on the machine, printing, scanning, or faxing
operation from a computer over network may become impossible. To use the machine over
network, refer to the setup manual of the machine to set up the machine again.
Start up the Canon IJ Network Tool.
1.
Starting up Canon IJ Network Tool
Select the printer in Printers.
2.
Select Maintenance from the Settings menu.
3.
1. Setting Initialization
Initialize
Reverts all the network settings of the printer to factory default. Click Initialize to display the
Initialize Settings dialog box and click Yes to initialize the network settings of the printer. Do not
turn off the printer during initialization. Click OK when initialization is complete.
Performing initialization when connected over wireless LAN will break the connection, so refer
to your setup manual of the machine to set up the machine again.
2. Network Setup of the Card Slot
Displays the status of the Card Slot. For details on how to mount the Card Slot as a network
Using the Card Slot over a Network
drive, see
Note
You can change the network settings of the printer using Canon IJ Network Tool with USB
connection after initializing the LAN settings. To change the network settings using Canon IJ
Network Tool, set Change wireless/wired in Device settings to Wireless LAN active or Wired LAN
active.
>
Changing and Confirming Network Settings
.
> Initializing the Network
Page top