Canon MX870 Series User Manual page 913

Default action
Sets whether to receive the fax after the specified ring time has elapsed.
For details on the fax priority mode, refer to
DRPD: Fax ring pattern
Sets the distinctive ring pattern of a call that the machine assumes is a fax call. If you
subscribe to a DRPD service, set the ring pattern to match the pattern assigned by your
telephone company.
You can select the ring pattern from Normal ring, Double ring, Short-short-long, Short-long-
short, and Other ring type.
Setting the Receive Mode
This setting is available only in the US and Canada.
Incoming ring
MX870 series
Selects whether to allow the external device to ring when the receive mode is set to Fax only
mode or Fax priority mode.
Refer to Setting the Receive Mode
* The range of the number of times the external device rings differs depending on the country
or region of purchase; from twice to 30 times, 10 times, or five times.
If you select ON, you can specify the number of times the external device rings.
MX350 series
Specifies the number of times the external device rings when the receive mode is set to Fax
only mode or Fax priority mode.
Refer to Setting the Receive Mode
* The range of the number of times the external device rings differs depending on the country
or region of purchase; from twice to 30 times, 10 times, or five times.
Manual/auto switch
Sets whether to automatically receive faxes after the external device rang a specified length of
time when Receive mode settings is set to TEL priority mode.
Refer to Setting the Receive Mode
If you select ON, you can specify the length of time until automatic reception is started.
Remote RX
Enables/disables remote reception.
Remote Reception
If you select ON, you can specify the remote reception ID.
RX image reduction
Enables/disables automatic reduction of incoming faxes so that they fit in the selected paper.
If you select ON, you can select the image reduction direction.
RX start speed
Selects the fax reception speed.
33600 bps is the maximum reception speed. When the telephone line condition or connection
is poor, selecting a lower reception speed may solve reception problems.
RX report
Sets whether to print a reception report after each reception.
RX Report
Fax reception reject
If you select ON, the machine rejects the reception of faxes with no sender information or
faxes from specific senders.
Rejecting Fax Reception
Receiving Faxes
for details on Fax only mode and Fax priority mode.
for details on Fax only mode and Fax priority mode.
for details on Fax only mode and Fax priority mode.
.