Trimming
Default (Off: No trimming), On (follow the camera's setting), Off
Settings on the Machine
You can change the PictBridge print settings from the PictBridge print settings screen. Set the print
settings to Default on the PictBridge compliant device when you want to print according to the
settings on the machine.
This section describes the procedure to display the PictBridge print settings screen. For setting
items, see
PictBridge print settings
1.
Make sure that the machine is turned on.
2.
Press the Setup
button.
3.
Select
Device settings, then press the OK button.
4.
Use the
button to select PictBridge print settings, then press the OK button.
The PictBridge print settings screen is displayed.
.
Page top