Canon MX870 Series User Manual page 840

> Printing Photographs Directly from a Compliant Device or a Wireless Communication Device
Advanced Guide
Photographs from a Wireless Communication Device
Printing via Bluetooth Communication
This section describes the procedure to print photos through Bluetooth communication from a mobile
phone with the optional Bluetooth Unit BU-30.
When printing from a mobile phone through Bluetooth communication, refer also to your product's
instruction manual.
For the procedure to print through Bluetooth communication from the computer, refer to
Communication .
Note
Mobile phones supporting OPP (Object Push Profile) or BIP (Basic Imaging Profile) can be used to
print photos.
Depending on your mobile phone, you may not perform printing even if your mobile phone supports
the profiles above. For information on the profiles your mobile phone supports, refer to your
product's instruction manual.
Printing through Bluetooth Communication
1.
Make sure that the machine is turned on.
2.
Load paper.
3.
Attach the optional Bluetooth Unit BU-30.
Insert the Bluetooth Unit BU-30 to the Direct Print Port.
4.
Press the Setup button.
5.
Print from mobile phone, then press the OK button.
Select
6.
Set the page size and layout.
You can change the print settings by pressing the right Function button. For setting items, see
Mobile phone print settings
> Printing via Bluetooth Communication
.
> Printing
About Bluetooth