Canon 4205B002 User Manual page 456

Select the data format of the scanned data.
If you save the scanned data on the USB flash drive/memory card:
PDF/Compact PDF/JPEG
If you forward the scanned data to the computer:
PDF/Compact PDF/TIFF/JPEG
If you attach the scanned data to an e-mail:
PDF/Compact PDF/JPEG
Note
PDF cannot be selected when Photo is selected for Doc. type in one of the conditions below.
When you forward the scanned data to the computer
When you attach the scanned data to an e-mail
PDF and Compact PDF can be selected when Document is selected for Doc. type and when
you forward the scanned data to the computer.
Select PDF if you use scanned document for printing.
Scan res
3.
Select the resolution for scanning.
If you save the scanned data on the USB flash drive/memory card:
150dpi/300dpi/600dpi
If you forward the scanned data to the computer:
75dpi/150dpi/300dpi/600dpi
If you attach the scanned data to an e-mail:
75dpi/150dpi/300dpi/600dpi
Note
When Compact PDF is selected for Data format, this setting cannot be changed.
Preview
4.
Select whether you use preview of the scanned data.
Note
This setting is available when you save the scanned data to a USB flash drive/memory card.
ADF orientation
5.
Select the orientation of the original document when Document is selected for Doc. type and PDF or
Compact PDF is selected for the data format.
Note
This setting is available also when Auto scan is selected.
Reduce show-thru*
6.
Characters on the back may show through when scanning a thin document such as a newspaper.
Select ON if characters seem to show through on the scanned document.
Descreen*
7.
A printout consists of minute dots to make characters or graphs. Interfering with each dot may result
in uneven shades or a striped pattern. Select ON if you notice any uneven shades or a striped
pattern on the scanned image.
Note
Even if ON is selected for this setting, some moire effects may remain if Unsharp mask is set
to ON. In that case, select OFF for Unsharp mask.