Canon 4205B002 User Manual page 880

Offhook alarm
Enables/disables the alarm that alerts you if the handset of the telephone connected to the
machine is not hung up properly.
Volume control
RX ring volume: Selects the ring volume when the machine receives a fax.
Line monitor volume: Selects the line monitor volume.
RX ring level
Adjusts the level of the ringing sound the machine makes when it receives a fax. You can
select either Standard or High.
Telephone line type
Selects the telephone line type setting for the machine.
Confirming the Telephone Line Connection
Note
This setting may not be available depending on the country or region of purchase.
Activity report
Sets whether to print the Activity report automatically after every 20 transactions.
Activity Report
Transmission settings
ECM TX
This machine is set to send/receive faxes in Error Correction Mode (ECM) by default.
Transmission/Reception of Faxes Using ECM
When the recipient's fax machine is compatible with ECM, the machine resends the fax after
correcting errors automatically. When the recipient's fax machine is not compatible with ECM,
the fax will be sent/received without automatic error correction.
ECM transmission can be disabled.
Pause time settings
Sets the length of time paused for each press of the Redial/Pause button.
Auto redial
Enables/disables automatic redialing.
Resending Faxes (Redialing a Busy Number)
If you select ON, you can specify the maximum number of redial attempts and the length of
time the machine waits between redial attempts.
TX start speed
Selects the fax transmission speed.
33600 bps is the maximum transmission speed. When the telephone line condition or