Canon 4205B002 User Manual page 911

Document in ADF.
Check document in ADF, then press OK
and redo operation.
Document size is too long.
Check document in ADF, then press OK
and redo operation.
Paper output tray is closed.
Open the paper output tray and press
OK.
The card is currently writable from PC.
Set to [Not writable from PC].
jammed paper or protective material that is preventing
the FINE Cartridge Holder from moving, and turn on the
machine again.
Important
Be careful not to touch the components inside the
machine. The machine may not print out properly if
you touch it.
If the problem is not resolved, contact the service
center.
6000 is displayed:
If any object is placed in front of the machine, remove it.
Open the Paper Output Tray gently, then turn the power
off and back on.
In other cases:
Turn off the machine, and unplug the power cord of the
machine from the power supply.
Plug the machine back in and turn the machine back on.
If the problem is not resolved, contact the service center.
The document is jammed in the ADF. Remove the document
page jammed in the ADF, then press the
again after resolving the error.
Document Jams in the ADF
The document is too long or is jammed in the ADF.
Remove the document page jammed in the ADF, then press
the OK button. After resolving the error, make sure that the
document you are loading meets the machine's
requirements before redoing the operation.
Document Jams in the ADF
Open the Paper Output Tray, then press the OK button.
The Card Slot is set to Writable from USB PC or Writable
from LAN PC.
You cannot print from the memory card or save the scanned
data to the memory card when the Card Slot is set to
Writable from USB PC or Writable from LAN PC. After writing
on the memory card, set to Not writable from PC again.
OK button. Operate
Page top