Canon 4205B002 User Manual page 139

Print Head, which may be necessary to maintain the machine's performance. When ink runs out,
replace the FINE Cartridge immediately with a new one.
1. Make sure that the power is turned on, and open the Paper Output Tray gently.
2.
Lift the Scanning Unit (Cover), then hold it open with the Scanning Unit Support (C).
The FINE Cartridge Holder moves to the replacement position.
Caution
Do not hold the FINE Cartridge Holder to stop or move it forcibly. Do not touch the FINE
Cartridge Holder until it stops completely.
Important
The inside of the machine may be stained with ink. Be careful not to stain your hands or
clothing when replacing FINE Cartridges. You can easily wipe off the ink from the inside of the
machine with tissue paper or the like.
For details on the cleaning, refer to the printed manual: Getting Started .
Do not place any object on the Document Cover. It will fall into the Rear Tray when the
Document Cover is opened and cause the machine to malfunction.
If the Document Cover is open, you cannot open the Scanning Unit (Cover). Be sure to lift the
Scanning Unit (Cover) with the Document Cover closed.
When opening or closing the Scanning Unit (Cover), do not touch the buttons and LCD on the
Operation Panel. Doing so may result in an unexpected operation.
Do not touch the metallic parts or other parts inside the machine.
If the Scanning Unit (Cover) is left open for more than 10 minutes, the FINE Cartridge Holder
moves to the right. In this case, close and reopen the Scanning Unit (Cover).
3.
Remove the empty FINE Cartridge.
Pinch the tabs and open the Ink Cartridge Locking Cover.
(1)
Remove the FINE Cartridge.
(2)