4.23 LCD unit/FL inverter
4 Replacement Procedures
4.23 LCD unit/FL inverter
Removing the LCD unit/FL inverter
To remove the LCD unit/FL inverter, follow the steps below and refer to Figure 4-38 to 4-42.
1. Remove the following screws and lift up the display assembly right above to
separate it and base assembly.
• M2.5×4B
×3
FLAT HEAD screw
Display assembly
M2.5×4B FLAT HEAD
M2.5×4B FLAT HEAD
Figure 4-38 Removing the display assembly
PORTÉGÉ M500 Maintenance Manual (960-559)
[CONFIDENTIAL]
4-59