Toshiba M500 ST5405 - Satellite - Core 2 Duo 2.13 GHz Maintenance Manual page 279

4.19 System board / DC-IN jack
To install the System board / DC-IN jack, follow the steps below and refer to Figure 4-26 to
4-28.
1. Connect the DC-IN jack cable to the connector CN8800 on the system board.
2. Insert the right side connectors of the system board into the slots of the base assembly
and install the system board.
3. Insert the DC-IN jack in to the slot of base assembly.
4. Connect the speaker cable to the connector CN6170 on the system board.
5. Stick two glass tapes on the wireless LAN cable and speaker cable.
PORTÉGÉ M500 Maintenance Manual (960-559)
4 Replacement Procedures
[CONFIDENTIAL] 4-49