4.5 HDD
NOTE: The following steps describe how to disassemble the HDD assembly, however, do
not disassemble if the HDD is working properly.
4. Place the HDD assembly on a flat surface, and remove the following screws.
• M3×4S
5. Separate the HDD and HDD Holder.
CAUTION: Do not apply pressure to the top or bottom of the HDD.
M3×4S FLAT HEAD
Figure 4-5 Separating the HDD and HDD holder
PORTÉGÉ M500 Maintenance Manual (960-559)
FLAT HEAD screw
HDD
4 Replacement Procedures
×4
M3×4S FLAT HEAD
HDD Holder
[CONFIDENTIAL]
4-13