4 Replacement Procedures
3. Take out the DC-IN jack from the slot and remove the system board left-upward
with the left side up.
DC-IN jack
Figure 4-27 Removing the System board / DC-IN jack (2)
4. Disconnect the DC-IN jack cable from the connector CN8800 on the system board.
Figure 4-28 Removing the System board / DC-IN jack (3)
Installing the System board / DC-IN jack
4-48
[CONFIDENTIAL]
DC-IN jack cable
PORTÉGÉ M500 Maintenance Manual (960-559)
4.19 System board / DC-IN jack
System board
CN8800