4.16 Internal microphone
Installing the Internal microphone
To install the internal microphone, follow the steps below and refer to Figure 4-22.
1. Install the internal microphone and microphone holder to the slot of the front panel.
CAUTION: When installing the microphone, the projection of the microphone shall
contact the guide of the base assembly as shown in the following figure.
2. Connect the microphone cable to the connector CN6050 on the system board
3. Stick the glass tape on the microphone cable.
PORTÉGÉ M500 Maintenance Manual (960-559)
4 Replacement Procedures
Microphone
Projection
Guide
[CONFIDENTIAL]
4-41