NEC NP-M311W Command Manual page 31

to appear (in terms of Normal mode values)
0AH : Remaining time until lamp warning message starts
to appear (in terms of Eco mode values)
10H : Remaining time until inhibition of lamp usage
(in terms of specified values)
11H : Remaining time until inhibition of lamp usage
(in terms of Normal mode values)
12H : Remaining time until inhibition of lamp usage
(in terms of Eco mode values)
Response: At the time of a success
23H 96H 01H xxH 06H DATA01 .. DATA06 CKS
(*1) (*2)
Data Portion Contents
-------------------------------------------------------------------
DATA01 same values as DATA01 of the command
DATA02 same values as DATA02 of the command
DATA03 .. 06 Acquired information
Response: At the time of a failure
A3H 96H 01H xxH 02H DATA01 DATA02 CKS
(*1) (*2)
Supplement:
* In case of acquiring lamp's use of hours
03H 96H 00H 00H 02H 00H 01H 9CH
Example of acquisition
DATA03 DATA04 DATA05 DATA06: lamp's use of hours
50H 46H 00H
Calculator Procedure
1) Set calculator to HEX
2) Punch in DATA06 DATA05 DATA04 DATA03 (00004650)
3) Change from HEX to Decimal - value will change to 18000 seconds
Lamp's use of hours = 18000/3600 = 5 hours
* In case of acquiring the remaining time until lamp warning message starts to appear (in terms of specified
values)
03H 96H 00H 00H 02H 00H 08H A3H
Example of acquisition
DATA03 DATA04 DATA05 DATA06: Remaining time
40H 7EH 05H
Calculator Procedure
1) Set calculator to HEX
2) Punch in DATA06 DATA05 DATA04 DATA03 (00057E40)
3) Change from HEX to Decimal - value will change to 360000 seconds
Remaining time until lamp warning message starts to appear
= 360000/ 3600= 100 hours
(!) Lamp Hour Meter
This is the timer for normal lamp mode conversion.
(!!) Lamp usage time
This is the lamp total usage. It is displayed in the projector's menu.
(!!!) NP4000/4001, NP4100/4100W : This function is not supported.
(*4) (*3)
00H: 18000 seconds
00H: 360000 seconds
(*3)