NEC NP-M311W Command Manual page 21

Supplement:
(!) LT/LT80/HT: "None"
015. POWER ON
**********************************************************************
Function:
This command switches on the main power of the projector.
Command:
02H 00H 00H 00H 00H 02H
Response: At the time of a success
22H 00H 01H xxH 00H CKS
(*1) (*2)
Response: At the time of a failure
A2H 00H 01H xxH 02H DATA01 DATA02 CKS
(*1) (*2)
Supplement:
The projector does not accept the other command during power on processing.
016. POWER OFF
**********************************************************************
Function:
This command switches off the main power of the projector.
Command:
02H 01H 00H 00H 00H 03H
Response: At the time of a success
22H 01H 01H xxH 00H CKS
(*1) (*2)
Response: At the time of a failure
A2H 01H 01H xxH 02H DATA01 DATA02 CKS
(*1) (*2)
Supplement:
The projector doesn't accept the other command during power off processing. (It contains a cooling period.)
018. INPUT SW CHANGE
**********************************************************************
Function:
This command switches the input terminal or the entry list.
Command:
02H 03H 00H 00H 02H DATA01 DATA02 CKS
Data Portion Contents
-------------------------------------------------------------------
DATA01 Switching object
00H : Entry List
01H : Input terminal
(*3)
(*4) (*3)
(*3)
(*4) (*3)
(*3)