Scan To Image; Scan To Ocr - Brother DCP-130C - Color Inkjet - All-in-One Software User's Manual

Scan to Image

When you choose Scan to Image, your document will be scanned and sent directly to the Macintosh
designated on your network. ControlCenter2 will activate the default graphics application on the designated
®
Macintosh . You can change the Scan configuration. (See Image (example: Apple
a
Load your document.
b
Press the (Scan) key.
c
Press a or b to choose Scan to Image.
Press OK.
d
Press a or b to choose the destination Macintosh
Press OK.
If the LCD prompts you to enter a Pin number, enter the 4-digit Pin number for the destination
®
Macintosh on the control panel.
Press OK.
e
Press Black Start or Color Start.
The machine starts the scanning process.

Scan to OCR

When you choose Scan to OCR, your document will be scanned and sent directly to the Macintosh
designated on your network. ControlCenter2 will activate the OCR software installed on your Macintosh
®
(Presto! PageManager
processing application on the designated Macintosh
(word processing application) on page 127.)
a
Load your document.
b
Press the (Scan) key.
c
Press a or b to choose Scan to OCR.
Press OK.
d
Press a or b to choose the destination Macintosh
Press OK.
If the LCD prompts you to enter a Pin number, enter the 4-digit Pin number for the destination
®
Macintosh on the control panel.
Press OK.
e
Press Black Start or Color Start.
The machine starts the scanning process.
Note
®
Presto! PageManager
®
) and convert your document into text for viewing and editing from a word
®
must be installed on your Macintosh
Network Scanning (For models with built-in network support)
®
you want to send to.
®
. You can change the Scan configuration. (See OCR
®
you want to send to.
®
.
®
you
®
PreView) on page 125.)
®
you
®
141
11
11
11