Using The Scan Key; Scan To E-Mail - Brother DCP-130C - Color Inkjet - All-in-One Software User's Manual

Using the Scan key

Note
If you are connected using USB, see Using the Scan key (For USB cable users) on page 113.

Scan to E-mail

When you choose Scan to E-mail (Macintosh
®
Macintosh you designated on your network. ControlCenter2 will activate the default E-mail application on
the designated Macintosh
and it will be sent with the E-mail from the Macintosh
You can change the
a
Load your document.
b
Press the (Scan) key.
c
Press a or b to choose Scan to E-mail.
Press OK.
d
Press a or b to choose the destination Macintosh
Press OK.
If the LCD prompts you to enter a Pin number, enter the 4-digit Pin number for the destination
®
Macintosh on the control panel.
Press OK.
e
Press Black Start or Color Start.
The machine starts the scanning process.
®
), your document will be scanned and sent directly to the
®
for addressing to the recipient. You can scan a black and white or color document
(Scan) configuration. (See E-mail on page 128.)
Network Scanning (For models with built-in network support)
®
as an attachment.
®
you want to use for E-mailing your document.
11
11
11
140