Selecting A Video Source; Picture Mode - ViewSonic CDP6530-T User Manual

Selecting a Video Source

Normally the CDP6530 LCD monitor automatically searches for available video sources after it is
turned on. You can also manually select one if multiple video sources are connected to the LCD
monitor.
To select a video source using the control panel:
1. Press the VIDEO SOURCE button on the control panel to display the Input Source menu.
2. Press the VIDEO SOURCE button several times, or press the
source.
To select a video source using the wireless remote control:
1. Press the INPUT button on the remote control to display the Input Source menu.
2. Press the INPUT button several times, or press the
input source.
You can also press the AV, VGA, DVI, HDMI or YPbPr button according to the video source you wish to
view.

Picture Mode

Standard Vivid
or button on the remote control to select an
Cinema User
26
or button to select an input