Table of Contents
Advertisement
Controlling the LCD monitor via RS-
232C Remote Control
This LCD monitor can be controlled by connecting a personal computer with a RS-232C terminal.
Functions that can be controlled by a personal computer are:
Connection
LCD Monitor + PC
NOTE:
• Two kinds of RS-232 protocols are provided: serial connection and non-serial connection.
• When connecting multiple monitors in a daisy-chain configuration, please refer to the table below for
the maximum number of monitors that can be deployed depending on the signal type and resolution
used. For example, if you use VGA as the signal type and signal resolution is 800 x 600 @ 60Hz, then
you can connect up to 16 monitors in a daisy-chain configuration. It is recommended that you use
VGA as the signal type for input/output connection in a daisy-chain configuration.
Resolution
640 x 480 @ 60Hz
640 x 480 @ 72Hz
640 x 480 @ 75Hz
720 x 400 @ 70Hz
800 x 600 @ 60Hz
800 x 600 @ 75Hz
1024 x 768 @ 60Hz
1024 x 768 @ 75Hz
1280 x 768 @ 60Hz
1280 x 960 @ 60Hz
1280 x 1024 @ 60Hz
1360 x 768 @ 60Hz
1366 x 768 @ 60Hz
1600 x1200 @ 60Hz
1920 x1080 @ 60Hz
Signal type
38
VGA
16
12
10
Advertisement
Table of Contents
