Option - ViewSonic CDP6530-T User Manual

Option

Aspect Ratio
• With this function, you can choose to let the LCD monitor display the input image in its original aspect
ratio (when Original is selected), or force the LCD monitor to fill the input image on the entire display
area (when Full is selected).
• Press ENTER, and then the
PIP (Picture in Picture)
Note: This item is not available for the AV and S-Video inputs.
• Press ENTER to display the sub-menu:
• ON/OFF: Turns on or off the PIP function of this LCD monitor. Press ENTER, and then the
button to turn this function on or off.
• Main Input: Selects the input source for the main picture. Press ENTER, and then the
button to change selection.
• Sub Input: Selects the input source for the sub picture. Press ENTER, and then the
button to change selection.
• PIP Size: Changes the size of the sub picture. Press ENTER, and then the
change selection.
• The availability of the PIP function is determined by the signal source combination. Please refer
to the table below. (
AV
S-Video
Sub
VGA
picture
signal
YPbPr
source
DVI
HDMI
Notes:
• In PIP mode, only the audio from the Main Input picture will be available.
Option
Aspect Ratio
PIP
Video Source
Auto Adjustment
Clock Frequency
Phase
H.Position
V.Position
Ambient Light Sensor
Blue Screen
Auto Detection
:Move :Enter
Enter
or button to change selection.
Option
ON/OFF
Main Input
Sub Input
PIP Size
Touch Feature
:Move
Enter :Enter
: PIP function available,
AV S-Video
31
Full
YPbPr
16
22
OFF
ON
ON
Exit
:Exit
ON
YPbPr
HDMI
Middle
ON
Exit :Exit
: PIP function unavailable)
Main picture signal source
VGA YPbPr
or
or
or
or button to
DVI HDMI