ViewSonic CDP4260-TL User Manual
  1. Manuals
  2. Brands
  3. ViewSonic Manuals
  4. Monitor
  5. CDP4260-TL
  6. User manual

ViewSonic CDP4260-TL User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
CDP4260-TL/CDP5560-TL
LCD Monitor
User Guide
IMPORTANT: Please read this User Guide to obtain important information on installing
and using your product in a safe manner, as well as registering your product for future
service. Warranty information contained in this User Guide will describe your limited
coverage from ViewSonic Corporation, which is also found on our web site at http://
box in the upper right corner of our website. "Antes de operar su equipo lea cu
idadosamente las instrucciones en este manual"
Model No.: VS15795/VS15796

Advertisement

Table of Contents
loading

Related Manuals for ViewSonic CDP4260-TL

Summary of Contents for ViewSonic CDP4260-TL

  • Page 1 Warranty information contained in this User Guide will describe your limited coverage from ViewSonic Corporation, which is also found on our web site at http:// box in the upper right corner of our website. “Antes de operar su equipo lea cu idadosamente las instrucciones en este manual”...
  • Page 2 Compliance Information NOTE: This section addresses all connected requirements and statements regarding regulations. Confirmed corresponding applications shall refer to nameplate labels and relevant markings on unit. FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
  • Page 3 CE Conformity for European Countries The device complies with the EMC Directive 2004/108/EC and Low Voltage Directive 2006/95/EC. Following information is only for EU-member states: The mark shown to the right is in compliance with the Waste Electrical and Electronic Equipment Directive 2012/19/EC (WEEE).
  • Page 4 Declaration of RoHS2 Compliance This product has been designed and manufactured in compliance with Directive 2011/65/EU of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS2 Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below: Proposed Maximum...
  • Page 5 Safety Precautions FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE LCD COLOR MONITOR: • DO NOT REMOVE MONITOR BACK COVER. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks. Refer •...
  • Page 6 CAUTION: Immediately unplug your monitor from the wall outlet and refer servicing to qualified service personnel under the following conditions: • When the power supply cord or plug is damaged. • If liquid has been spilled, or objects have fallen into the monitor. •...

  • Page 7: Table Of Contents

    7.2. Troubleshooting ......27 3.2. Connecting a PC ......10 ....28 3.2.1. Using VGA input ....10 8.1. CDP4260-TL ........ 28 3.2.2. Using DVI input ....10 8.2. CDP5560-TL ........ 30 3.2.3. Using HDMI input ....10 8.3. RS232 Command Table ....32 3.3.
  • Page 8 Serial Number: Purchase Date: Product disposal at end of product life ViewSonic respects the environment and is committed to working and living green. Thank you for being part of Smarter, Greener Computing. Please visit ViewSonic website to learn more. USA & Canada: http://www.viewsonic.com/company/green/recycle-program/ Europe: http://www.viewsoniceurope.com/uk/support/recycling-information/...

  • Page 9: Unpacking And Installation

    Unpacking and Installation 1.1. Unpacking • This product is packed in a carton, together with the standard accessories. • Any other optional accessories will be packed separately. • Due to the size and weight of this display it is recommended for two people to move it. •...

  • Page 10: Installing And Removing Table Stands (Optional)

    1.4. Installing and Removing Table Stands (optional) To install table stands: 1. Ensure your display is powered off. 3. Grab the carrying handles and place the display face-down on the protective sheet. 4. After inserting the stand in the guide block, tighten the screws on both sides of the display. NOTE: The longer side of the stand should face the front of the display.

  • Page 11: Installing And Removing Ops Module (Cdp4260-Tl/Cdp5560-Tl Series) (Optional)

    1.5. Installing and Removing OPS module (CDP4260-TL/CDP5560-TL series) (optional) To install OPS Module: 1. Power off the display. 2. Remove the cover of OPS after take screw off. NOTE: Keep the OPS cover for future use. Screw Screw To remove OPS Module: 1.

  • Page 12: Vesa Grid

    4. For the wall-mounting kit, use M6 mounting screws (having a length 10 mm longer than the thickness of the mounting bracket) and tighten them securely. 1.6.1. VESA Grid 400(H) x 200(V) mm CDP4260-TL 200(H) x 200(V) mm 400(H) x 400(V) mm CDP5560-TL...

  • Page 13: Parts And Functions

    Parts and Functions 2.1. Control Panel CDP4260-TL/CDP5560-TL: MUTE INPUT MENU POWER button Remote control sensor and power status Use this button to turn the display on or put the indicator display to standby. • Receives command signals from the remote control.

  • Page 14: Input/Output Terminals

    2.2. Input/Output Terminals CDP4260-TL/CDP5560-TL: 4 5 6 8 9 10 11 13 14 AC IN VGA AUDIO IN AC power input from the wall outlet. Audio input for VGA source (3.5mm stereo phone). MAIN POWER SWITCH COMPONENT IN (BNC) Switch the main power on/off.

  • Page 15: Remote Control

    2.3. Remote Control [DISPLAY] button Press to turn on/off the information OSD displayed on the upper right corner of the screen. 2.3.1. General functions [ ] button • Press to move the selection left in OSD menu. • Press to decrease the value in OSD menu. POWER •...

  • Page 16: Inserting The Batteries In The Remote Control

    2.3.2. Inserting the batteries in the remote 2.3.4. Operating range of the remote control control Point the top of the remote control toward the The remote control is powered by two 1.5V AAA display’s remote control sensor when pressing a batteries.

  • Page 17: Connecting External Equipment

    Connecting External Equipment 3.1. Connecting External Equipment (DVD/VCR/VCD) 3.1.1. Using COMPONENT video input Audio Out COMPONENT Out (YPbPr) DVD / VCR / VCD [AUDIO IN] [COMPONENT IN] (Pr/Pb/Y) 3.1.2. Using HDMI video input DVD / VCR / VCD HDMI Out [HDMI IN]...

  • Page 18: Connecting A Pc

    3.2. Connecting a PC 3.2.1. Using VGA input VGA Out D-Sub 15 pin Audio Out [AUDIO IN] [VGA IN] [VGA AUDIO IN] 3.2.2. Using DVI input DVI Out Audio Out [AUDIO IN] [DVI IN] [VGA AUDIO IN] 3.2.3. Using HDMI input HDMI Out [HDMI IN]...

  • Page 19: Connecting Audio Equipment

    3.3. Connecting Audio Equipment 3.3.1. Connecting external speakers External speakers 3.3.2. Connecting an external audio device Audio In Stereo Amplifier [AUDIO OUT]...

  • Page 20: Connecting Multiple Displays In

    3.4. Connecting Multiple Displays in a Daisy-chain Configuration wall. NOTE: 3.4.1. Display control connection Connect the [RS232C OUT] connector of DISPLAY 1 to the [RS232C IN] connector of DISPLAY 2. DISPLAY 1 DISPLAY 2 [RS-232C] [RS-232C IN] [RS-232C OUT] [RS-232C IN] 3.4.2.

  • Page 21: Osd Menu

    OSD Menu 4.2. OSD Menu Overview An overall view of the On-Screen Display (OSD) 4.2.1. PICTURE menu structure is shown below. You can use it as a reference for further adjusting your display. PICTURE 4.1. Navigating the OSD Menu BRIGHTNESS CONTRAST SHARPNESS BLACK LEVEL...

  • Page 22: Screen Menu

    USER COLOR 4.2.2. SCREEN menu With this function you can adjust the color tones of the image precisely by changing the R (Red), SCREEN G (Green) and B (Blue) settings independently. AUTO SETUP AUTO ADJUST NOTE: This item is functional only when {COLOR H POSITION V POSITION TEMPERATURE} is set to {USER}.

  • Page 23: Audio Menu

    This function allows you to optimize the picture INPUT RESOLUTION display on screen. The following zoom modes are Set the resolution of the VGA input. This is only available for: required when the display is unable to detect the • PC mode: {FULL} / {NORMAL} / {CUSTOM} / VGA input resolution correctly.

  • Page 24: Pip Menu

    4.2.4. PIP menu Main Picture VGA HDMI YPbPr Video Sub Picture PIP MODE HDMI PIP SIZE SMALL YPbPr PIP AUDIO MAIN AUDIO PIP H POSITION Video PIP V POSITION SUB INPUT VIDEO PIP RESET (O: PIP function available, X: PIP function unavailable) By pressing the [PIP ON/OFF] button on the remote control, you can change the mode in the...
  • Page 25 You can select: 4. For more schedule settings, press [EXIT] button and then repeat the steps above. A check mark • The time for the display to turn on and turn off. in the box next to the number of the schedule •...

  • Page 26: Configuration2 Menu

    4.2.6. CONFIGURATION2 menu • {NORMAL} - All displays can be operated normally by the remote control. • {LOCK} - Lock the remote control function CONFIGURATION2 of this display. To unlock, press and hold the LANGUAGE [DISPLAY] button on the remote control for 5 OSD TURN OFF OSD H POSITION OSD V POSITION...

  • Page 27: Configuration3 Menu

    • POSITION - Select the position of this display 4.2.7. CONFIGURATION3 menu in the screen matrix. • FRAME COMP. - Choose to turn the frame CONFIGURATION3 compensation function on or off. If turned on, POWER SAVE HEAT STATUS the display will adjust the image to compensate SCREEN SAVER for the width of the display bezels in order to SIDE BORDER COLOR...

  • Page 28: Advanced Option

    SCREEN SAVER 4.2.8. ADVANCED OPTION menu Choose to enable the panel saving functions to reduce the risk of the “image persistence”. ADVANCED OPTION SCREEN SAVER INPUT CHANGE NORMAL TERMINAL SETTING SCAN CONVERSION COOLING FAN AUTO COLOR SYSTEM BRIGHTNESS SCAN MODE SERIAL CONTROL MOTION LAN SETTING...
  • Page 29 SCAN CONVERSION • DHCP - Choose to enable or disable the DHCP function. If enabled, the display will be assigned Choose to enable or disable the IP (Interlace to IP address, Subnet mask and Default gateway Progressive) conversion function. automatically. If disabled, you will be prompted •...

  • Page 30: Commercial Display Lan Control

    Commercial Display LAN 5.2. Before Using Web Browser Control Control To use the Web browser control, computer setups are required. 5.1. OSD Menu Setup for Network Computer Setup (for Windows operating Connection system) Disable proxy server settings To proceed the network setting, you will have to enter the OSD menu.
  • Page 31 Screen Audio...
  • Page 32 Advanced option Software update...

  • Page 33: Input Mode

    Input Mode VGA Resolution: Active Resolution Standard Refresh Rate Pixel Rate Aspect Ratio Stand for Mode Resolution H Pixels V Lines 60 Hz 25.175 MHz 72 Hz 31.5 MHz Video Graphic Array 75 Hz 31.5 MHz Wide Video Graphic WVGA 70 Hz 33.75 MHz 16:9...

  • Page 34: Cleaning And Troubleshooting

    Cleaning and Troubleshooting 7.1. Cleaning When Using the Display • Do not bring your hands, face or objects close to the ventilation holes of the display. The top of the display is usually very hot due to the high temperature of exhaust air being released through the ventilation holes.

  • Page 35: Troubleshooting

    7.2. Troubleshooting Symptom Possible Cause Remedy No picture is displayed 1. The power cord is disconnected. 1. Plug in the power cord. 2. The main power switch on 2. Make sure the power switch is the back of the display is not switched on.

  • Page 36: Cdp4260-Tl

    Technical Specifications 8.1. CDP4260-TL Display: Item Screen Size (Active Area) 42” LCD Aspect Ratio 16:9 Number of pixels 1920 (H) x 1080 (V) Pixel pitch 0.4845 (H) x 0.4845 (V) [mm] Displayable colors 1.06 Billion colors Brightness (typical) 450 cd/m2...
  • Page 37 General: Item Power Supply AC 100 ~ 240V, 50 ~ 60Hz Power Consumption (Max) 250W Power Consumption (typ.) 120W Power Consumption (Standby & Off) <0.5W (RS232 in active) Dimensions (With Stand) [W x H x D] 976.16 x 609.5 x 400 mm Dimensions (Without Stand) [W x H x D] 976.16 x 569.5 x 79.8 mm Weight (With Stand) 26.35 Kg...

  • Page 38: Cdp5560-Tl

    8.2. CDP5560-TL Display: Item Screen Size (Active Area) 55” LCD Aspect Ratio 16:9 Number of pixels 1920 (H) x 1080 (V) Pixel pitch 0.63 (H) x 0.63 (V) [mm] Displayable colors 1.06 Billion colors Brightness (typical) 450 cd/m2 Contrast ratio (typical) 1300:1 Viewing angle 178 degrees...
  • Page 39 General: Item Power Supply AC 100 ~ 240V, 50 ~ 60Hz Power Consumption (Max) 275W Power Consumption (typ.) 145W Power Consumption (Standby & Off) <0.5W (RS232 in active) Dimensions (With Stand) [W x H x D] 1257.3 x 770.85 x 400 mm Dimensions (Without Stand) [W x H x D] 1257.3 x 728.1 x 79 mm Weight (With Stand) 45 Kg...

  • Page 40: Rs232 Command Table

    8.3. RS232 Command Table The Set-Function command allows you to control the Monitor behavior in a remote sit through the RS232 port. The Set-Function packet format consists of 9 bytes. The Get-Function packet format consists of 9 bytes which is similar to the Set-Function packet structure. Communication Setting Set function table: Set Function...
  • Page 41 Mute 000: OFF 001: ON (mute) Button Lock 000 : Unlock 001 : Lock PIP Mode 000 : OFF 001: PIP 002: PBP PIP Sound 000: Main select 001: PIP PIP position 000: Up 001: Down 002: Left 003: Right PIP Input <...
  • Page 42 Get function table: Get Function Length Command Command Value Range Comments Type Code (ASCII) Code (Hex) (Three ASCII bytes) Get-Contrast 000 ~ 100 Gets Contrast value Get-Brightness 000 ~ 100 Gets Brightness value Get-Sharpness 000 ~ 100 Gets Sharpness value Get-Color 000 ~ 100 Gets Color value...

  • Page 43: Other Information

    Latin America C= http://www.viewsonic.com/la/ www.viewsonic.com/la/ soporte@viewsonic.com (Mexico) soporte/servicio-tecnico Nexus Hightech Solutions, Cincinnati #40 Desp. 1 Col. De los Deportes Mexico D.F. Tel: 55) 6547-6454 55)6547-6484 Other places please refer to http://www.viewsonic.com/la/soporte/servicio-tecnico#mexico Latin America C= http://www.viewsonic.com/la/ www.viewsonic.com/la/ soporte@viewsonic.com (Peru) soporte/servicio-tecnico Macau www.hk.viewsonic.com T= 853 2870 0303 service@hk.viewsonic.com...

  • Page 44: Limited Warranty

    If a product proves to be defective in material or workmanship during the war- ranty period, ViewSonic will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components.
  • Page 45 There are no warranties, express or implied, which extend beyond the description contained herein including Exclusion of damages: ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be li- able for: 1. Damage to other property caused by any defects in the product, damages based upon inconvenience,...

  • Page 46: Mexico Limited Warranty

    Exclusion of damages: ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable for: Damage to other property caused by any defects in the product, damages based upon inconvenience, loss of use of the product, loss of time, loss of profits, loss of business opportunity, loss of goodwill, interference with business relationships, or other commercial loss, even if advised of the possibility of such damages.
  • Page 47 Av Ferrocarril Sonora #3780 L-C 10 Pointe Dr. Suite 200. Brea, CA 92821, UY.S.A Col 20 de Noviembre Tel: 800-688-6688 (English); 866-323-8056 (Spanish); Tijuana, Mexico E-Mail: http://www.viewsonic.com 4.3: ViewSonic Mexico Limited Warranty Page 2 of 2 CD_LW02 Rev. 1A 06-25-07...

This manual is also suitable for:

Cdp5560-tl

Table of Contents