Power Indicator; Using Power Management; Selecting A Video Source; Picture Size - ViewSonic VS11895 User Manual

Power Indicator

Status
Power ON Green
Power OFF Red
Power Standby when Red On
"SCHEDULE" is enable Green Blinking
Power Standby Red, Green
Diagnosis Red Blinking
(Detecting failure) * See troubleshooting

Using Power Management

The LCD monitor follows the VESA approved DPM Power Management function.
The power management function is an energy saving function that automatically reduces the power consumption of the
display when the keyboard or the mouse has not been used for a fixed period.
The power management feature on your new display has been set to the "ON" mode. This allows your display to enter a
Power Saving Mode when no signal is applied. This could potentially increase the life and decrease the power
consumption of the display.

Selecting a video source

Use the input button to set [VIDEO].
Use the COLOR SYSTEM menu to set [AUTO], [NTSC], [PAL], [SECAM], [PAL60], [4.43NTSC], according to your video
format.

Picture Size

RGB 1, 2 FULL
DVD/HD, VIDEO FULL
Signal Type NORMAL SIZE
4:3
Squeeze
NORMAL: Display by the inputted signal aspect ratio by PC signal, or display in 4:3 aspect ratio at DVD/HD or VIDEO
signal.
FULL: Display in entire screen.
DYNAMIC: Expand 4:3 pictures to the entire screen with non-linearity. (Some round image will be cut by expansion.)
CUSTOM (ZOOM): Image can be expanded beyond the active display area. The image which is outside of active dia-
play area is not displayed.
REAL: Image will be displayed 1 by 1 pixel.
ZOOM
ViewSonic CD4220
To view a video source:
NORMAL CUSTOM
REAL
NORMAL DYNAMIC
REAL CUSTOM
Recommended Size
NORMAL
DYNAMIC
FULL
ZOOM
21