Adjusting The Decurler Lever - Xerox DocuPrint 155 Troubleshooting Manual

Adjusting the decurler lever

Troubleshooting Guide
To adjust the decurler lever:
1. Open the right door of the printer and locate the decurler
lever.
Figure 5-2. Decurler lever
2. If the print curl is +2 or more, move the green decurler lever to
the right.
3. If the print is -3 or more, move the green decurler lever to the
left.
4. If the decurler adjustment does not eliminate the paper curl
problem, turn the paper stack over in the feeder tray.
5. If there is still a paper curl problem, perform steps 1 to 4
again.
6. If all else fails, insert paper from a new ream.
Clearing paper misfeeds and jams
5-25