Correcting Skewed Printing - Xerox DocuPrint 155 Troubleshooting Manual

Hide thumbs Also See for DocuPrint 155:

Table of Contents

Optimizing print quality

Correcting skewed printing

6-2

If the printed output is repeatedly delivered with the image

skewed (crooked on the page), or the pages are damaged when

delivered to the output bin, you may need to adjust the

registration transport roll (heavy paper) levers. This may occur

with heavy weight papers. Follow this procedure to correct this

situation:

1. Open the right and left doors of the printer and locate the

heavy paper levers, behind areas 2 and 4.

2. Pull the levers forward (toward you) on the silver latch

release.

3. Turn both of the levers to the left (counter-clockwise), as

illustrated in the following figure.

Figure 6-1. Adjusting the registration transport roll levers

NOTE: If your system is equipped with the optional 7 by 10-

inch paper enablement kit, it has three levers, as shown in the

next illustration. (This kit is not available for the Model 96

NPS/IPS.)

Turn the left-most lever to the left (counter-clockwise) and the

other two levers to the right (clockwise).

Troubleshooting Guide

Table of Contents