Clearing paper misfeeds and jams
Measuring the paper curl
5-24
To measure the paper curl:
1. Print five one-sided (simplex) 8.5 by 11 inch or A4 sheets.
2. Measure the amount of curl in the prints by holding the five
prints in the top center of the short edge.
Keep the image toward you.
Figure 5-1. Measuring the paper curl
3. Place the bottom edge of the prints over the paper curl
measurement chart located at the end of this chapter.
•
If the print curl on the printed paper stock measures
between +2 and -2, do not change the decurler setting.
•
If the curl is between +2 and +3, or -3 and -4, use the
following procedure to adjust the decurler lever.
Troubleshooting Guide