Xante Accel-a-Writer 8300 Introduction Manual page 33

1. Open the manual feed tray by grasping the hand grip and
pulling out and down (fig. 2.31 ).
Fig. 2.31 Open the Manual feed Tray
2. Remove the shipping cardboard covering the tray extenders
when first setting up the printer.
3. Open the tray extender by grasping it in the center and pulling
out until it snaps up into place. For large media, open the
tabloid extender by pushing it up from the bottom and flipping
it over into place (fig. 2.32).
Tabloid Extender
Fig. 2.32 Pull Out the Tray and Tabloid Extenders
__________________________________________ Installation 2-33
Tray Extender