Xante Accel-a-Writer 8300 Introduction Manual page 29

Hide thumbs Also See for Accel-a-Writer 8300:

Table of Contents

Make sure the size indicator label on the front of the

cassette displays the correct setting. The green dial on

the top left at the front of the cassette controls the label.

To change this setting, roll the green dial forward until

the correct size appears on the label (fig. 2.27; a).

The green dial changes the size indicator label and sets

keys that notify the printer engine of the media size

configuration. This dial has three settings that can be used

for letter (LTR), and one setting each for executive (EXE),

legal (LGL), and 11" x 17" paper sizes.

Note: If this setting is incorrect, printing errors can

Make sure the pointer on the right media guide is set for

the correct media size. To change this setting, adjust the

two green side guides (fig 2.27; b).

Make sure the back media guide is set for the correct

media size (fig. 2.27; c). To change this setting, tilt the

bar forward to free the three bottom tabs; then, lift out

the bar. With the bar still tilted forward, align it over the

correct setting, slide the tabs into the slots, and tilt the

bar upright into position.

__________________________________________ Installation 2-29

occur or the image may be printed incorrectly

on the media.

Table of Contents