Table of Contents
Advertisement
Specifications
PM-1: PERSONAL MONITOR AMPLIFIER
Rated Power Output
60 W
Nominal Input Level (@1 kHz)
INPUT
Channel 1 (MIC/LINE) -50 dBu to -20 dBu
Channel 2,3 (LINE)
Channel 4 (MONITOR) -20 dBu
Nominal Output Level (@1 kHz)
LINE OUT
+ 4 dBu
* 0 dBu = 0.775 Vrms
Speakers
30 cm (12 inches) x1
Tweeter x1
Controls
Channel 1 (MIC/LINE) Volume Knob
Channel 2 (LINE) Volume Knob
Channel 3 (LINE) Volume Knob
Channel 4 (MONITOR) Volume Knob
Equalizer
BASS Knob
TREBLE Knob
MASTER VOLUME Knob
POWER Switch
Indicator
POWER
-20 dBu
Connectors
Channel 1 Input Jack (XLR Type Balanced, 1/4" Phone Type)
Channel 2 Input Jack (1/4" Phone Type)
Channel 3 Input Jack (1/4" Phone Type)
Channel 4 Input Jack (1/4" Phone Type)
LINE OUT Jack (1/4" Phone Type)
PHONES Jack (Stereo 1/4" Phone Type, Mono signal output)
Power Supply
AC 117 V, AC 230 V, AC 240 V
Power Consumption
52 W
Dimensions
630 (W) x 490 (D) x 565 (H) mm
24-13/16 (W) x 19-5/16 (D) x 22-1/4 (H) inches
(case of internal stand set minimum)
630 (W) x 490 (D) x 1200 (H) mm
24-13/16 (W) x 19-5/16 (D) x 47-1/4 (H) inches
(case of internal stand set maximum)
Weight
22 kg
48 lbs 9 oz
Accessory
Owner's Manual
Option
All Purpose Clamp Set: APC-33
* When performing on digital percussion attached to the PM-1's
integrated stand, be sure to use only the APC-33 all purpose
clamp set to attach the device to the stand.
* In the interest of product improvement, the specifications and/
or appearance of this unit are subject to change without prior
notice.
13
Advertisement
Table of Contents
