Roland CUBE-100 BASS Owner's Manual

Roland CUBE-100 BASS Owner's Manual

Roland owner's manual bass amplifier cube-100
Hide thumbs Also See for CUBE-100 BASS:

Advertisement

Owner's Manual
Thank you, and congratulations on your choice of the Roland CUBE-100 BASS Amplifier.
These sections provide important information concerning the proper operation of the unit.
Additionally, in order to feel assured that you have gained a good grasp of every feature provided
by your new unit, Owner's manual should be read in its entirety. The manual should be saved and
kept on hand as a convenient reference.
Before using this unit, carefully read the sections entitled
IMPORTANT SAFETY INSTRUCTIONS (p. 2)
USING THE UNIT SAFELY (p. 3–p. 4)
IMPORTANT NOTES (p. 4).
This unit is equipped with a protection circuit.
The protection circuit helps ensure safety by operating when excessive input continues for a long
time while the device is at a location with a high ambient temperature. Sound drop-out may occur
when the protection circuit is actuated during use.
Please read through the documentation carefully to ensure correct use.

Main Features

● Adopting Roland's original FFP technology, this highly functional DSP bass amp features 100-watt
sound output through the newly developed 30 cm (12-inch) coaxial 2-way wide-range speaker.
● The amp is equipped with a total of eight COSM amp model types, including seven of the most
popular bass amps along with a newly developed SUPER FLAT.
SUPER FLAT is an original amp type that features a wide-range frequency and faithful response
suitable for use with upright basses.
● In addition to an easy-to-use 4-band equalizer, this amp features a SHAPE function for even
greater flexibility in creating sounds and rich sound variation.
● The amp is equipped with a total of three bass effect systems, including COMPRESSION, an EFX
system with CHORUS, FLANGER, and T-WAH, and basic DELAY/REVERB.
● In addition to RECORDING OUT/PHONES jack with high-quality sound modeling, the CUBE-
100 BASS is also equipped with professional quality BALANCED OUT, LINE OUT, and TUNER
OUT, and EXTERNAL SPEAKER jacks. With such expandability, this amp can be used for a wide
variety of applications, from home recording to live performances.
FFP (Feed Forward Processing) is system control technology that optimizes the performance of
the amp, speakers, and cabinet characteristics according to the signals being input, based on the
results of analyses of the operation and behavior of each section of existing amp systems.
COSM (Composite Object Sound Modeling) is Roland's innovative and powerful sound
modeling technology. COSM analyzes the many factors that make up the original sound, such as
the electrical and physical characteristics of the original, and then produces a digital model that
can reproduce the same sound.
* All product names mentioned in this document are trademarks or registered trademarks of their
respective owners.
Copyright © 2004 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any form without the
written permission of ROLAND CORPORATION.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CUBE-100 BASS and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Roland CUBE-100 BASS

  • Page 1: Main Features

    Owner’s Manual Thank you, and congratulations on your choice of the Roland CUBE-100 BASS Amplifier. These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new unit, Owner’s manual should be read in its entirety.
  • Page 2: Important Safety Instructions

    WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION : RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
  • Page 3 • Before using the unit in a foreign country, consult with your retailer, the nearest Roland Service Center, or an authorized Roland distributor, as listed on the “Information” page. • Do not put anything that contains water (e.g., flower vases) on this unit.
  • Page 4: Important Notes

    101a • The unit should be located so that its location or position does not interfere with its proper ventilation. 102a • Always grasp only the plug on the power-supply cord when plugging into, or unplugging from an outlet. 103a •...
  • Page 5: Panel Descriptions

    Panel Descriptions fig.01 1. INPUT Jack Connect your bass guitar here. 2. PEAK Indicator This lights up when the signals are distorted in the input section. If this lights frequently, it indicates that the input signal is in excess of the optimal level. ➂...
  • Page 6: Power Switch

    Panel Descriptions 13. EFX (Effects) Knob Turn this knob to chorus, flanger, or T-wah to select the corresponding effect. Turn the knob to adjust the amount of effect applied. The ON indicator lights up when EFX is turned on, and goes out when EFX is turned off.
  • Page 7 * This function may not work properly when inputting chords; for example, sounds may not OCTAVE BASS * All product names mentioned in this document are trademarks or registered trademarks of their respective owners, and are not related to Roland Corporation.
  • Page 8: Rear Panel

    Panel Descriptions Rear Panel FS-5U FS-5U External Speaker Polarity Switch * Less than 8 Ω, more than 100 W 1. FOOT SW (Foot Switch) Jack Foot switches (the optional BOSS FS-5U) are connected here. * Set the polarity switch as shown in figure. EFX: Switches on and off of EFX.
  • Page 9: Main Specifications

    16-1/16 (W) X 12-1/4 (D) X 18-1/2 (H) inches Weights 17 kg / 37 lbs 8 oz Accessories Owner’s Manual, Roland Service Information sheet Options Foot switch FS-5U (BOSS) * 0 dBu = 0.775 Vrms * In the interest of product improvement, the specifications and/or appearance of this unit are subject to change without prior notice.
  • Page 10: Sample Settings

    Sample Settings ALL ROUND (SUPER FLAT) SHAPE switch: OFF FINGER & FRETLESS (BASS 360) SHAPE switch: OFF SLAP BASS (SESSION) SHAPE switch: ON or OFF JAZZ WOOD (SUPER FLAT) SHAPE switch: ON SMOOTH JAZZ (FLIP TOP) SHAPE switch: ON or OFF An original amp featuring a wide-range frequency response.
  • Page 11 Set the VOLUME knob at appropriate volume level. FUNK WAH (T.E) SHAPE switch: OFF ROCK RIFF (CONCERT 810) SHAPE switch: ON or OFF OVER DRIVE (B MAN) SHAPE switch: OFF Setting Name: SHAPE Switch This setting employs the T-WAH feature for a funky sound that responds to the bass touch.
  • Page 12: Federal Communications Commission Radio Frequency Interference Statement

    This product complies with the requirements of European Directives EMC 89/336/EEC and LVD 73/23/EEC. FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

Table of Contents