Lamp Age - Eiki LC-X2U Owner's Instruction Manual

is
When this function Turn SPLIT WIPE function On in the SETTING menu. The picture will change into next one by sliding black image Turn SPLIT WIPE function On in the SETTING menu. The picture will change into next one by sliding black image
side ways when the input source side ways when the input source
off.
in
When this function is
these on-screen displays are very helpful, these may spoil the view
To avoid this, you can keep back certain displays by switching
that you can hide.
• Wait Display
• Mute Display
• Normal Display
When this function is in the "On" position, the top/bottom-picture reverse.
When this function is in the "On" position, the left/right picture reverse
capability lets you project onto a rear projection screen.
Turn SPLIT WIPE function On in the SETTING menu. The picture will change into next one by sliding black image
side ways when the input source
Change the input source by MODE button. The picture is replaced by black image from side ways to the center, and
the next one appears from the center to side ways like drawing the black curtains.
Power management will be turn the projector Lamp off when the input signal is interrupted (Picture is not displayed)
over 5 minutes. This aims at saving power and Lamp life. The Lamp is automatically turned on when the signal is
input. To activate this function, turn the "Power management" in the SETTING menu "On".
This Projector is designed for connecting with SUB Port of the computer or peripheral equipment that is to be
standard.
When this function is in the "
wireless remote control unit.
When this function is in the "
NOTE: Before you control the projector by computer, install USB driver )optionally saled parts) and set up the
computer following instruction in the USB driver package. Contact your authorized dealer.
in the "On" position, the left/right picture reverse capability
is changed. is changed.
This projector has other functions setting: Blue back, Display, Reverse T/B,
Reverse R/L, Split wipe, Power management, USB, Remote control and

Lamp age.

When this function is
without video noise on the screen when the video source is unplugged or turned
the "On" position, on-screen displays always appear when adjustments are made. Although
•
Mode Display
•
Zoom/Focus/Lens shift Display
•
No show Display
is changed.
" (Mouse) position, you control the pointer of the computer using the projector's
" (Control) position, you control the projector by computer.
in
the "On" position, the projector will project a blue image
if
adjustments are made during presentations.
this function
"Off". The followings are the displays
•
Volume Display
•
D.Zoom Display