Eiki LC-X2U Owner's Instruction Manual page 10

COMPUTER INPUT-1 TERMINAL (ANALOG HDB
1
15-PIN)
Used to connect a computer to the projector.
COMPUTER INPUT-1 RMINAL (DIGITAL MDR 20-
2
PIN)
Used to connect a computer to the projector.
COMPUTER INPUT-2 JACKS (BNC TYPE x 5)
3
Used to connect a computer to the projector.
MONITOR OUTPUT TERMINAL (ANALOG HDB
4
15-PIN)
Used to connect a monitor to the projector.
COMPUTER AUDIO INPUT-i JACKS (R and L)
5
Used to connect an audio output from the computer to
the
projector.
COMPUTER AUDIO INPUT-2 JACKS (R and L)
6
Used to connect an audio output from the
computer to the projector.
AUDIO MONITOR OUTPUT JACKS (R and L)
7
Used to connect an audio input from audio
equipment to the Projector.
CONTROL PORT-1 CONNECTOR
8
Used to connect a mouse cable to the
projector.
CONTROL PORT-2 CONNECTOR
9
Used to connect a mouse cable to the
projector.
USB PORT-1 CONNECTOR
10
Used to connect a computer to the projector.
USB PORT-2 CONNECTOR
11
Used to connect a computer to the projector.
SERIAL PORT TERMINAL (DB9)
12
Used to connect a computer to the projector.
WIRED REMOTE JACK
13
When using the wired remote control, connect
the remote cable to this jack.