Table of Contents
Advertisement
The TEMPERATURE WARNING INDICATOR flashes red when the
internal
temperature of the projector exceeds the normal temperature.
Possible causes for the temperature warning may be:
1. Ventilation slots of the projector are blocked. In such an event,
the projector so that ventilation slots are not obstructed.
reposition
2. Air filter is clogged with dust particles. Remove dust from the air
filter by
following instructions in the Air Filter Care and Cleaning section
above.
If the TEMPERATURE WARNING INDICATOR still continues to flash after
checking (1) and (2), call your authorized dealer or service station.
The removable air filter prevents dust from accumulating on the surface of
the projection lens and projection mirror. Should
clogged with dust particles, it will reduce the cooling fan's
effectiveness and may result in internal heat
of the projector.
To clean the air filter, follow the cleaning procedures below:
Turn the POWER ON/OFF button OFF.
2. Remove the
air filter cover.
air filter and sponge
3. Remove the
4. Clean the air filter with a vacuum cleaner.
5. Replace the air filter and sponge. Make sure that air filter cover is
fully inserted.
Do not clean with water. Doing so may damage the air filter.
Do not operate the projector with air filter removed.
TO ENJOY PICTURE IMAGE, USE THE PROJECTOR IN THE CLEAN
ENVIRONMENT. USAGE IN THE CLEAN ENVIRONMENT IS
RECOMMENDED.
dusty or smoky conditions, dust may accumulate on the
When used under the
liquid crystal panel and lens inside
the screen together with the picture.
noticed contact the place where your authorized dealer or service station for
the cleaning.
the air filter become
build up and reduce the life
from the filter cover.
it, and may resultantly be projected on
When the above symptoms are
Advertisement
Table of Contents
