Eiki LC-X2U Owner's Instruction Manual page 37

is
This projector compatible with the six major broadcast video standards: PAL, SECAM, NTSC, NTSC 4.43, PAL-
M and PAL-N (COLOR SYSTEMs). When the color system
systems
of 4 (PAL, SECAM, NTSC or NTSC 4.43) automatically. However, if the video signal
enough to detect the video format, the projector may not reproduce the proper video image. In case this happens,
this projector allows you to choose a
1. Connect the video equipment to the PROJECTOR and turn the projector on first.
2. Set MODE SELECT to "VIDEO MODE".
3. Press the MENU BUTTON and the MAIN MENU DISPLAY dialog box will appear.
4. Press the POINT LEFT/RIGHT BUTTON(s) to select SYSTEM and press the SELECT (REAR CLICK)
Another dialog box COLOR SYSTEM DISPLAY will appear. The current COLOR SYSTEM
BUTTON.
displayed in the system window.
5. Press the POINT DOWN BUTTON and a red arrow will appear.
5. To change the current COLOR SYSTEM, press the POINT UP/DOWN BUTTON(s) to move the arrow to a
desirable system and then press the SELECT (REAR CLICK) BUTTON.
7. The setting changed remains effective until the MAIN ON/OFF switch is turned off.
1. Connect the video equipment to the PROJECTOR and turn the projector on first.
2. Set MODE SELECT to "VIDEO MODE".
3. Press the MENU BUTTON and the MAIN MENU DISPLAY dialog box will appear.
4. Press the POINT LEFT/RIGHT BUTTON(s) to select VIDEO SOURCE and press -the SELECT (REAR CLICK)
BUTTON. Another dialog box VIDEO SOURCE DISPLAY will appear. The current VIDEO SOURCE is displayed
in the window.
5. Press the POINT DOWN BUTTON and a red arrow will appear.
6. To change the current VIDEO SOURCE, press the POINT UP/DOWN BUTTON(s) to move the arrow to a
desirable video source and then press the SELECT (REAR CLICK) BUTTON.
7. The setting changed remains effective until the MAIN ON/OFF switch is turned oft.
specific broadcast signal format.
-
is
set to "Auto position", this projector can detect one
-
is
not strong
-
is