Table of Contents
Advertisement
Problem:
Picture is T/B
inverted,
Picture is L/R
Reversed.
Some displays are
not seen during the
operations
No sound.
Remote control unit
doesn't work.
Wireless mouse
function does not
work.
Check Reverse T/B feature.
(See "OTHER FUNCTION SETTING" section on pages 50
Check Reverse L/R feature.
(See "OTHER FUNCTION SETTING" section on pages 50 51).
Check Display feature.
(See "OTHER FUNCTION SETTING" section on pages 50 51).
• Check audio cable connection from audio input source.
• Adjust audio source.
• Press the VOLUME (+) button.
•
Press the MUTE button.
• Check the batteries.
• Make sure nothing is blocking between the remote control sensor and remote
control unit. S
• Make sure you are not too far from the projector when using the remote controlunit.
{Maximum operate range 16.4(5 m)}.
• Check the transmitted signal mode from the remote control unit.
(See "OTHER FUNCTION SETTING" section on pages 50 — 51).
• Check the cable connection between the projector-and the computer.
• Check the mouse setting on your computer. -
•
Turn on the projector before you turn on the computer.
Try these Solutions:
Advertisement
Table of Contents
