Canon Usb Video Driver - Canon 9540A003 - Optura 400 Camcorder Instruction Manual

Canon USB Video Driver

The Canon camcorder is connected to the computer via USB cable, but
is not recognized by the computer.
Check if the camcorder is set to NETWORK mode.
Check if the USB cable is correctly connected.
The driver is not correctly installed. Uninstall (
the driver.
Cannot find the driver files.
The driver files were not correctly installed to the computer. Insert the CD-
ROM and reinstall the files to the computer.
Cannot capture movies from the tape to the computer.
Your camcorder does not support the movie capture/record function using
a USB cable. Refer to Camcorder Categories (
Functions and Drivers by Categories (
Check if the camcorder is correctly connected to the computer using a
USB cable.
The camcorder is connected to a USB 1.1 port. Connect the camcorder to
a computer with Hi-Speed USB 2.0.
Check if the camcorder is set to PLAY (VCR) mode.
No movies are recorded on the tape. Load a recorded cassette.
Cannot record the first part of the movie.
Depending on the editing software, the first part of the movie may not be
recorded. For details, refer to the manual of your software.
The quality of movies captured from the tape is low.
The quality of a movie captured with a camcorder set to NETWORK mode
is low. Set the camcorder to PLAY (VCR) mode to capture movies.
Cannot record movies to the tape.
Your camcorder does not support the movie capture/record function using
a USB cable. Refer to Camcorder Categories (
Functions and Drivers by Categories (
Check if the camcorder is correctly connected to the computer using a
USB cable.
The camcorder is connected to a USB 1.1 port. Connect the camcorder to
a computer with Hi-Speed USB 2.0.
Check if the camcorder is set to PLAY (VCR) mode.
Check if a recordable cassette is loaded.
86 Troubleshooting
71) and reinstall (
13) and Available
13).
13) and Available
13).
19)