Installing Printer Driver Through A Usb Connection - Canon FAXPHONE L170 Software Manual

Installing Printer Driver through a USB Connection

The following is the installation procedure of the user software using a USB connection, under Windows 98/Me/2000/XP.
The screen shots shown are from Windows 2000.
Before you install the software, make sure you do the following:
•
Confirm the machine is not connected to your computer.
•
Turn on the machine. (See the Basic Guide.)
•
Quit any Windows applications that are running on your computer.
IMPORTANT
•
Do not connect the USB cable to the port on your computer when you start the procedure. During the installation of the software, the
installation program will prompt you when it is appropriate to connect the machine to your computer.
2 •
If you are using Windows 2000/XP , be sure to log on as a member of Administrators. The full control access right for the printer is
necessary for the installation of CARPS.
1
Place the CD-ROM into your CD-ROM drive.
The CD-ROM menu is displayed.
NOTE
•
If the CD-ROM does not apper automatically, select "Run" from the "Start" menu, type D:\CSplash.exe (if your CD-ROM drive is drive D:) in
the command line and click "OK."
2
Click [Install Printer Driver].
The Setup Wizard starts.
3
Click [Next] on the Setup Wizard dialog box.
2-2 Installing the Printer Driver on Your Computer