Page 1
PUB. DIM-594 DV Network Software Version 2 Instruction Manual (Installation and Preparation) Mode d’emploi (Installation et préparation) Manual de Instrucciones (Instalación y preparativos) This manual covers the installation and the connection procedures only. For more operating instructions, refer to the PDF format manual provided on the DIGITAL VIDEO SOLUTION DISK For Windows.
All rights, including but not limited to copyrights and trade secret rights, to the SOFTWARE belong to Canon, its affiliated corporations and third party licensors. Your use of the SOFTWARE is subject to the laws of the United States, and Canada, and other applicable copyright and trademark laws, and nothing in this Agreement constitutes a waiver of the rights of Canon, its affiliated corpora- tions and third party licensors under such laws.
Page 3
(90) days after purchase from an authorized Canon dealer as evidenced by your sales receipt. Your sole remedy for a defective CD- ROM shall be replacement of the same without charge when returned by you at your expense to your point of purchase and proven to be defective upon inspection.
Page 4
CONCERNING THE SUBJECT MATTER HEREOF AND SUPERSEDES ALL PROPOSALS OR PRIOR AGREEMENTS, ORAL OR WRITTEN, AND ANY OTHER COMMUNICATIONS BETWEEN YOU AND CANON RELATING TO THE SUBJECT MATTER HEREOF. NO AMENDMENT TO THIS AGREEMENT SHALL BE EFFECTIVE UNLESS SIGNED BY A DULY AUTHORIZED OFFICER OF CANON.
Requirements for Using DV Messenger ..............14 Installing the Software .................... 15 Installing the DV Network Software ................ 15 Installing the Canon USB Video Driver ..............18 Installing the AV/C Camera Storage Subunit-WIA Driver ......... 19 Connecting the Camcorder to a Computer ............. 22 Connecting the Camcorder Using a USB Cable ............
PDF-Format Manual More details of the features and procedures for using the DV Network Software are explained in the PDF format manual provided on the DIGITAL VIDEO SOLUTION DISK For Windows. ❍ In order to view the PDF manual, Adobe Acrobat Reader needs to be installed on your computer.
(MultiMediaCards or SD Memory Cards), personal computers, or peripheral devices, or due to use of a memory card not formatted by a Canon camcorder. ¡ Canon is a registered trademark of Canon Inc.
Read This First About This Manual ¡ In this manual, DV Messenger Version 2 is abbreviated as "DV Messenger". ¡ In this manual, the operating modes of camcorders are described as following: – CAMERA mode: Mode for recording video and sound to tape. –...
USB (1.1/2.0) or IEEE1394 (OHCI compliant) Free Hard Disk Space: • DV Messenger: 100 MB or more • Canon USB Video Driver: 1 MB or more • AV/C Camera Storage Subunit-WIA Driver: 1 MB or more 800 × 600 pixels/High Color (16 bit) or better...
You can send video and sound recorded with the camcorder via the Internet. ■ Camcorder Operation Canon camcorders only (refer to the table on p.11) You can operate the camcorder connected to your computer and the camcorder connected to your contact's computer.
Canon USB Video Driver USB Canon camcorders only (refer to the table below) If your camcorder is equipped with the NETWORK mode, installing the Canon USB Video Driver allows you to use DV Messenger by connecting the camcorder to a computer using a USB cable.
❍ The View & Record function, Image Capture function and AV/C Camera Storage Subunit-WIA Driver cannot be used. You cannot connect the camcorder using a USB cable (Canon USB Video Driver cannot be used). If your contact has one of the below camcorders, you cannot transfer files from the contact’s camcorder to your computer.
Read Carefully ❍ If you leave the camcorder turned on for a long time, heat generation may cause damage to the camcorder. Turn off the camcorder after use. ❍ Tapes may be damaged if left in the camcorder for a long time. Do not leave tapes in the camcorder to prevent damage.
Requirements for Using DV Messenger To use DV Messenger, it is required that Windows XP is installed and Windows Messenger 4.5, 4.6 or 4.7 operates correctly. Make sure to confirm the following before installing DV Messenger. 1. Windows XP and Windows Messenger 4.5, 4.6 or 4.7 are installed*. 2.
AV/C Camera Storage Subunit-WIA Driver and Canon USB Video Driver will be copied to your computer. The drivers will be installed when you connect the camcorder to the computer. For the installation procedure of the Canon USB Video Driver, see p. 18. For the installation procedure of the AV/C Camera Storage Subunit-WIA Driver, see p.
Page 16
Installing the Software ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Click [DV Network Software Installation]. ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Select your language and click [OK]. • If Windows Messenger 4.5, 4.6 or 4.7 is not installed on your computer, a dialog appears indicating that DV Messenger cannot be installed. If you wish to install only the AV/C Camera Storage Subunit-WIA Driver, close the dialog and proceed with the installation.
Page 17
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Select the software you wish to install and click [Next]. ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Read the license agreements and click [Yes]. ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• When the confirmation window appears, click [Yes]. ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Confirm the target folder and click [Next]. If a dialog appears asking you whether you wish to create a shortcut of DV Messenger on the desktop, click [Yes].
Installing the Software Installing the Canon USB Video Driver Installing the Canon USB Video Driver allows you to use DV Messenger by connecting the camcorder to a computer using a USB cable. ❍ The Canon USB Video Driver can only be used with camcorders equipped with the NETWORK mode.
Restart the computer. ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Check if the driver has been installed correctly. From the [start] menu, select [My Computer] and check if the [Canon Camera Storage Device] icon appears. If the icon does not appear, the installation has not been completed properly.
Page 20
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Connect the camcorder to the computer using the DV cable 22). ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• From the [start] menu, select [My Computer]. ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Right-click the mouse button on the [Canon Camera Storage Device] icon and select [Properties]. ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Click the [Events] tab.
Page 21
❍ To start a WIA-compliant application automatically, select [Start this program] and click [OK]. ❍ If the started application displays a message such as [TWAIN data source not found. Reinstall the scanner software.], select [WIA-Canon Camera Storage] and use the WIA-TWAIN Driver.
Connecting the Camcorder to a Computer If your camcorder is equipped with the NETWORK mode, you can use a DV cable or a USB cable to connect your camcorder to the computer. If your computer is not equipped with the NETWORK mode, use the DV cable. Connecting the Camcorder Using a USB Cable ❍...
Preparations for DV Messenger Before you use DV Messenger, check whether the camcorder is correctly connected to the computer. Checking the Camcorder Connection ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Connect the power adapter to the camcorder. ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Set the camcorder to NETWORK mode. (Camcorder without NETWORK mode: Set the camcorder to CAMERA mode.) •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••...
Page 24
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Click [Next]. ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Confirm that your camcorder is displayed and click [Cancel]. • If you are connecting a Canon camcorder using a USB cable, check if [Canon USB Video] is displayed. If you are connecting a Canon camcorder using a DV cable, check if [Canon DV Device] is displayed.
Setting the UPnP Router If you are using an UPnP-compliant router to connect to the Internet, you need to install UPnP and disable the firewall of Windows XP to use DV Messenger. ■ Installing UPnP ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• From the [start] menu, select [Control Panel]. •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••...
Page 26
Preparations for DV Messenger ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Click [Network Connections]. ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• From the [Advanced] menu, select [Optional Networking Components] from the displayed menu. ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Select [Networking Services] and click [Details].
Page 27
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Place a checkmark next to [Universal Plug and Play] (if you have installed Service Pack 1, place also a check mark next to [Internet Gateway Device Discovery and Control Client]) and click [OK]. ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Click [Next]. Installation starts. ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• When installation is complete, restart your computer.
Preparations for DV Messenger ■ Disabling the Firewall About the Firewall The firewall is an important security system that protects your computer by limiting or preventing access by other computers on the Internet. If you disable the function, other computers may be able to access the files on your computer, or write files onto your hard disk.
Page 29
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Click [Network Connections]. ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Select [Local Area Connection], right-click the mouse button and select [Properties].
Page 30
Preparations for DV Messenger ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Click the [Advanced] tab, remove the checkmark ✓ from the [Internet Connection Firewall] section and click [OK]. ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Restart the computer. After restart, repeat steps 1 to 3 and check if an icon appears under [Internet Gateway Device].
Videoconferencing Starting DV Messenger ❍ DV Messenger will not start when you have signed in to Windows Messenger. In such case, sign out of Windows Messenger first and start DV Messenger. ❍ Do not access the memory card using programs such as Windows Explorer while DV Messenger is started.
Page 32
Videoconferencing ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• In the Windows Messenger window, click [Click here to sign in]. DVM Panel Windows Messenger To use DV Messenger, both you and your contact need to be online. – If your contact is already online when you sign in: A message will be send automatically to your contact notifying that you have signed in.
Preparing the Camcorder for Communication When you have signed in, set the camcorder and adjust the volume of the speaker and microphone. ❍ Connect speaker or headphones as necessary. ❍ As microphone, use the microphone of the camcorder. ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Set the camcorder to NETWORK mode. (Camcorder without NETWORK mode: Set the camcorder to CAMERA or PLAY (VCR) mode.) When you have set the camcorder to PLAY (VCR) mode, play back the tape.
Page 34
Videoconferencing ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Select your camcorder and click [Next]. If you are connecting a Canon camcorder using a USB cable, select [Canon USB Video]. If you are connecting a Canon camcorder using a DV cable, select [Canon DV Device]. ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• When the video picture appears, click [Next].
Page 35
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Set [Microphone] and click [Next]. • If you are connecting a Canon camcorder using a USB cable, select [Canon USB Video]. If you are connecting a Canon camcorder using a DV cable, select [Canon DV Device]. • The installed sound device appears for [Speaker].
Videoconferencing ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Click [Finish]. The settings for speaker and microphone are complete. Starting a Videoconference There are two methods to start a videoconference. You can invite your contact or you can accept an invitation from your contact. ❍ If you connect to the Internet after starting DV Messenger, the connection may fail.
Page 37
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Select your contact and click [Select]. • Only online registered members will be listed. You can only perform a videoconference with members who have a camcorder connected and are using DV Messenger Version 2. • Windows Messenger’s [Conversation] window appears. •...
Page 38
Videoconferencing ■ Starting a Videoconference by Accepting an Invitation If your contact clicks on and selects you as the contact, a connecting request appears on your computer screen. •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• When the connecting request dialog appears, click [Yes]. The communication between your and your contact's DV Messenger starts and you can now operate the camcorder of your contact from the DVM panel.
Ending DV Messenger Disconnecting DV Messenger ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Click ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• When the confirmation window appears, click [YES]. The communication with your contact ends. If you wish to communicate with another contact, click and select a contact from the list. Ending DV Messenger •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••...
Page 40
CANON INC. U.S.A. Canon U.S.A., Inc. Canon Customer Care Center Tel (US): 1-800-828-4040 (Mon.-Fri., 9 AM to 8 PM Eastern Time) CANADA Canon Canada Inc. Tel (Canada): 1-800-OK-CANON (1-800-652-2666) ASIA Canon Hongkong Co., Ltd. 19/F., The Metropolis Tower, 10 Metropolis Drive,...