Canon 9540A003 - Optura 400 Camcorder Instruction Manual page 42

5 Control panel
6 Camcorder status
Type of interface
7
used for connection
8 Function buttons
9 Camcorder model
name
10 Contact's name
11 Minimize
12 Close
42 Screen Displays
Here you find the buttons for operating the camcorder.
Displays the type of the camcorders and if they are set
to allow/prohibit remote control.
Camcorder with NETWORK mode, remote
control allowed.
Camcorder with NETWORK mode, remote
control prohibited.
Camcorder without NETWORK mode,
remote control allowed.
Camcorder without NETWORK mode,
remote control prohibited.
appears when the camcorder is connected using a
DV (IEEE1394) cable, and
cable.
Here you find the buttons for various settings (
Displays the camcorder model names
([Canon MiniDV] appears with camcorder models
released before 2001).
Displays the name of your contact.
Click here to minimize the size of the DVM panel. To
display the DVM panel again, double-click the DV
Messenger icon on the taskbar, or click the DV
Messenger icon and select [Open DVM Panel] from the
displayed menu.
Click here to close the DVM panel. To display it again,
double-click the DV Messenger icon on the taskbar, or
click the DV Messenger icon and select [Open DVM
Panel] from the displayed menu. This does not end DV
Messenger ( 40).
when using a USB
43).