Specifications - Cisco SPA303 Datasheet

Security Features
Password-protected system, preset to factory defaults
●
Password-protected access to administrator and user-level features
●
HTTPS with factory-installed client certificate
●
HTTP digest: encrypted authentication via MD5 (RFC 1321)
●
Up to 256-bit Advanced Encryption Standard (AES) encryption
●
Documentation
Quick-start installation and configuration guide
●
User guide
●
Administration guide
●
Provisioning guide (for service providers only)
●
Package Contents
Cisco SPA 303 IP phone, handset, and stand
●
Handset cord
●
RJ-45 Ethernet cable
●
Power adapter
●
Quick installation guide
●
CD
●

Specifications

Table 1 gives specifications for the Cisco SPA 303 3-Line IP Phone.
Table 1.
Description
Data networking
© 2010 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Specifications for the Cisco SPA 303 3-Line IP Phone
Note: Many features are programmable within a defined range or list of options. Please see the SPA Administration
Guide for details. The target configuration profile is uploaded to the SPA 303 at the time of provisioning.
Specification
● MAC address (IEEE 802.3)
● IPv4 (RFC 791)
● Address Resolution Protocol (ARP)
● DNS: A record (RFC 1706), SRV record (RFC 2782)
● Dynamic Host Configuration Protocol (DHCP) client (RFC 2131)
● Internet Control Message Protocol (ICMP) (RFC 792)
● TCP (RFC 793)
● User Datagram Protocol UDP (RFC 768)
● Real Time Protocol RTP (RFC 1889, 1890)
● Real Time Control Protocol (RTCP) (RFC 1889)
● Real Time Control Protocol – Extended Report ( RTCP-XR) ( RFC 3611 )
● Differentiated Services (DiffServ) (RFC 2475)
● Type of service (ToS) (RFC 791, 1349)
● VLAN tagging 802.1p/Q: Layer 2 quality of service (QoS)
● Simple Network Time Protocol (SNTP) (RFC 2030)
Data Sheet
Page 4 of 7