Eiki EIP-3500 Owner's Manual page 21

Eiki dlp projector owner's manual eip-3500
Hide thumbs Also See for EIP-3500:
Table of Contents

Advertisement

4.
Adjust the angle
Adjust the projector angle
• • • • • Adjust the projector angle using the HEIGHT
ADJUST button.
HEIGHT ADJUST button
5.
Adjust the focus and the zoom
1 1 1 1 1 Bring the projected image into focus
• • • • • When the projector is turned on, the focus function automati-
cally displays a focus pattern and performs Auto Focus once.
• • • • • To perform Auto Focus again, press the
AUTO FOCUS button.
On the
On the remote
projector
• • • • • The focus pattern is displayed, the focus is automati-
cally adjusted, and then the focus pattern disappears.
6.
Select the INPUT mode
Select the "INPUT 1" using the INPUT buttons on the projector or the INPUT1 button on the remote control.
On the
On the remote
projector
• • • • • When pressing '
• • • • • When using the remote control, press
7.
Turn the Power off
Press the POWER button, then press that button again while the confirmation message is displayed, to put the
projector into standby mode.
On the projector
• • • • • Unplug the power cord from the AC outlet after the cooling fan stops.
control
" " On-screen Display (RGB)
" "
"
control
' ' /"
' '
" " on the projector, input mode switches in order of :
" "
INPUT 1
INPUT 2
INPUT 3
On the remote control
• • • • • This projector is equipped with an "Auto Keystone
Correction" function that automatically corrects
any trapezoidal distortion within the projected
image. The correction is made automatically
provided the vertical incline or decline is within 12
degrees.
2 2 2 2 2 Adjust the projected image size
• • • • • Adjust the projected image size by adjusting zoom.
On the projector
1 Press
2 Adjust by pressing ' or ".
• • • • • If the image is out of focus or you want to finely adjust
the focus, adjust the focus manually.
On the projector
1 Press
2 Adjust by pressing \ or |.
INPUT 4
/
" " On-screen Display
" "
"
On the remote control
.
Adjust by pressing the
ZOOM buttons.
On the remote control
Adjust by pressing the
.
FOCUS buttons.
/
/
to switch the INPUT mode.
Page 30
Page 32
Page 33
Page 29
17

Advertisement

Table of Contents
loading

Table of Contents

Save PDF