E-Mail Setting - Sanyo Network Board MD13NET Owner's Manual

Basic Setting and Operation

E-mail Setting

This product has an E-mail function which can send an alert message to
users or an administrator if it detects an abnormality on the projector or run
out of the life span of the lamp. Click on the E-Mail Setting linked text on the main
menu and follow the below steps.
1
SMTP Server*
Type the E-mail address of SMTP server and administrator and press the Set but-
ton. The administrator address is set to "Reply-To" address sent from the projector.
2
Registering and deleting E-mail
addresses
Type the E-mail address onto the Mail
Address text area and press
the Set button. To check the
registered addresses, click
on the Mail Address Check
& Delete linked text. The
addresses are listed as the
figure on the right.
To delete the registered
addresses, check the address
you want to delete and press
the Delete button.
32
1