Save A Image Adjustment Value; Load A Image Mode - Sanyo Network Board MD13NET Owner's Manual

Save a image adjustment value

1
Decide your desired image adjustment
value through the image adjustment
pages "1" to "3".
2
Display the page "3" and select the
desired image number with the pull-
down menu of the Save Adjustment.
3
Register by pressing the Set button.
To restore the adjustments, press the
Reset button.
The Image1 to Image4 are for the user preset modes to store the image adjustment.
The Original Mode is represented the mode that user preset mode Image1 to
Image4 is created from the predefined image modes Standard, Real or Cinema.

Load a image mode

Display the page "1" and select a set to
load with the pull-down menu button of
the Image Adjustment Mode and press
the Set button.
Control the Projector
Network Board
OWNER'S MANUAL
43