Table of Contents
Advertisement
Installation
Configure the network with the projector
A
This example explains how to set the following configuration.
IP Address
Subnet Mask
Default Gateway
DNS
1
Selection of network menu [Network]
Turn on the projector and display the menu on the screen. Select the Network
icon from the Setting sub menu using the pointers, and then press the SELECT
button on the remote control or on the projector. Confirm that its mode is set On.
If not, change mode to On using the pointer
2
Configuration for IP Address/ Subnet mask/Default Gateway*/DNS*
Press the SELECT button again, the following network setting menu appears on
the screen. Enter the specified network address with
lowing is an example of a network configuration.
* In the network environments not using a Gateway or Router, the Default Gateway address
should be set to [0.0.0.0]. If you do not use the functions E-mail or DNS server, it should also
be set to [0.0.0.0] for the DNS address.
16
: 192.168.1.201
: 255.255.255.0
: 192.168.1.1
: 0.0.0.0
NETWORK SETTING
192
IP Address
255
Sub net
192
Gateway
0
DNS
/
.
* The above on-screen display may differ from
the actual display depending on the functions
of the projector you use.
168
1
201
255
255
0
168
1
1
0
0
0
SET
CANCEL
/ /
/
keys. The fol-
Advertisement
Table of Contents
