Examples Of Connection - Sanyo Network Board MD13NET Owner's Manual

Appendix

Examples of Connection

Peer-To-Peer connection
Connect the projector (PJ01) to the control computer (PC05) directly
Projector Name: PJ01
IP Address : 192.168.0.2
Subnet Mask : 255.255.255.0
Default Gateway : 0.0.0.0
DNS : 0.0.0.0
Connect the projector (PJ01) to the control computer (PC05) via the hub.
Projector Name: PJ01
IP Address : 192.168.0.2
Subnet Mask : 255.255.255.0
Default Gateway : 0.0.0.0
DNS : 0.0.0.0
When the projector is connected to the computer directly without hub, the UTP cross cable
should be used .
70
* UTP cross cable
Computer Name: PC05
IP Address
Subnet Mask
Default Gateway
DNS
Hub
Computer Name: PC05
IP Address
Subnet Mask
Default Gateway
DNS
Computer Name: PC10
IP Address
Subnet Mask
Default Gateway
DNS
: 192.168.0.5
: 255.255.255.0
:
:
: 192.168.0.5
: 255.255.255.0
:
:
: 192.168.0.10
: 255.255.255.0
:
: