Table of Contents
Advertisement
Service
This function sets parameters for service items of the projector. As these
service items are used mainly for maintenance, please use the default set-
ting unless a change is needed.
- The indication of video system in this page is displayed as follows.
Video System
Input Signal
480I
NTSC [VIDEO], [S-VIDEO], [Y, Cb/Pb, Cr/Pr]
480P
NTSC [Y, Cb/Pb, Cr/Pr]
575I
PAL [VIDEO], [S-VIDEO], [Y, Cb/Pb, Cr/Pr]
575P
PAL [Y, Cb/Pb, Cr/Pr]
720P
[Y, Pb, Pr]
1035I
[Y, Pb, Pr]
1080I60
[Y, Pb, Pr]
1080I50
[Y, Pb, Pr]
The adjustments of H/V Area and Position are effective only for video input mode. These
adjustment values are stored with each video system mode as the above.
Item
Description
Fan Control
Speed ................Sets fun control speed with
Maximum or Normal.
Prohibition..........Sets the prohibition of the pro-
jector control by the remote
control or the keys on the pro-
jector.
Item
Description
Video System ....Displays the current video sys-
tem mode.
H Area* ..............Adjusts the horizontal effective
area.
V Area* ..............Adjusts the vertical effective area.
H Position* ........moves image horizontally
V Position* ........moves image vertically.
* It can not be displayed in the computer mode.
To restore the setting, press the Default but-
ton.
Control the Projector
Network Board
OWNER'S MANUAL
49
Advertisement
Table of Contents
