How To Set The Timer; Check The Timer Events - Sanyo Network Board MD13NET Owner's Manual

How to set the Timer

This function is used to turn the
projector off or on at a pro-
grammed day/date and time.
Follow the below steps for set-
ting.
1
Set a day or date
To set the timer event at
same time everyday,
select "day" entry with radio
button and then select
desired day with the pull-
down menu button. The selectable days are as follows:
- Same time everyday
- Every week (Monday to Friday) - Every week (Monday to Saturday)
To set the timer event on specified date,
select "date" entry with radio button and then type the date with
(Year/Month/Date) format.
Ex.: Type [2002/08/20] if you specify [August 20, 2002].
2
Set a time
Type the time with (Hour:Minute) and 24 hours format.
Ex.: Type [18:25] if you specify [PM 6 o'clock and 25 minutes].
3
Select an event "ON" or "OFF".
Select an event ON or OFF with the pull-down menu button to turn on or off the
projector.
4
Register an event
Press the Set button to register the
set timer event. Repeat steps 1 to 4
for another timer event setting.

Check the Timer events

To check the set timer events, click on
the Timer Check linked text.
- Every week ( a day from Monday to Sunday)
Control the Projector
Select day
Select date
Event
Network Board
OWNER'S MANUAL
47