Preparations; Names Of Parts; Main Body - Kyocera KM-6030 Operation Manual

1

Preparations

Names of parts

Main body

5
1
2
3
4
5
6
6
Memory card (CompactFlash) slot — Insert an optional memory card (CompactFlash) here.
You can write optional fonts, macros, and forms into the memory card. For details, refer to The
Functions Edition of the Operation Guide.
USB interface connector — USB interface based on USB2.0. Use a USB cable to connect to
a USB port of a computer.
Network interface connector — Use a 10Base-T/100Base-TX network cable to connect to a
network.
Parallel interface connector — Use a parallel cable to connect to a parallel port of a
computer.
Main power switch — When using this machine, turn on the main power switch. When
connecting a printer cable or the like, turn off this switch.
Operation panel — When performing setting on this machine, use the operation panel.
1
3
2
4
1