Kyocera KM-6030 Operation Manual page 14

Set-up
11
Press [ ] or [ ] to select IP Address
and press [Change #].
12 Use the numeric keys on the keypad to
enter the address.Enter the 3-digit
address in the highlighted area and
press the [#] key.
Fix the entered address three digits at a
time by pressing the [#] key.
13
Enter the next 3-digit address and press
the [#] key.
To modify the entered address, press
the [#] key to select the 3-digit address
to be modified and use the numeric keys
to enter the address again.
14
Use the same procedure to enter the
remaining address and then press
[Close]. The display returns to the
TCP/IP screen.
If you press [Back], the entered address
is cleared and the previous address is
set again.
15 Press [ ] or [ ] to select Subnet Mask
and press [Change #].
16
Set the address using the same
procedure as IP address setting from
steps 12 to 14.
8
Setting Item
DHCP
BOOTP
IP Address
Subnet Mask
Gateway
Interface - Network
IP Address
Confirm per 3 lines pressing # key.
10
Printer menu - Interface - Network
IP Address
Confirm per 3 lines pressing # key.
10 141
Printer menu - Interface - Network
s pressing # key.
10 141 110 204
Interface - Network - TCP/IP
Setting Item
DHCP
BOOTP
IP Address
Subnet Mask
Gateway
Interface - Network
Subnet Mask
Confirm per 3 lines pressing # key.
0
Printer menu - Interface - Network
Back
Value
Off
Off
0. 0. 0. 0
0. 0. 0. 0
Change #
0. 0. 0. 0
Back
(with #key)
0 0 0
- TCP/IP
Back
(with #key)
0 0
- TCP/IP
Back
(with #key)
Back
Value
Off
Off
10. 141. 110. 204
0. 0. 0. 0
Change #
0. 0. 0. 0
Back
(with #key)
0 0 0
- TCP/IP
Close
Close
Close