Canon SX50 - REALiS SXGA+ LCOS Projector Command Reference Manual page 40

Commands
ACADJUST
Function This performs advanced color correction.
Parameter
Parameter
NOCORRECT
MEM_L
MEM_M
MEM_H
6AX
The RANGE command can be used to obtain the parameter range that can be set at that time.
Response An 'i:OK' is returned after setting is successful.
Description The advanced color correction method is set by selecting from "No correction", "Low to High memory color correction",
and "6-axis adjustment".
(1) This command is identical to the Advanced color adjustment function in the Image adj. menu.
(2) For 6-axis color adjust, use the separate 6-axis correction R to Y color balance and color level settings
commands (6AXR to 6AXY) to set the hue and color saturation for each axis.
(3) This sets the currently selected input signal and image mode.
(4) The GET command can be used to retrieve the current color compensation method.
Example Control
> ACADJUST=MEM_M
< i:OK
Reference
> GET ACADJUST or ?ACADJUST
< g:ACADJUST=6AX
Obtain settable parameters
> RANGE ACADJUST
< r:ACADJUST=I,NOCORRECT,MEM_L,MEM_M,MEM_H,6AX
*Commands are indicated by ">", and responses are indicated by "<".
Supported Command States
Power supply
OFF ON PM
D-RGB A-RGB1 A-RGB2
× ×
○ ○ ○
※If a state is not supported, "INVALID_MODE" or "NOT_POWER_SUPPLIED" is returned with the Err response.
※When the power supply state is in the process of switching, an "i:BUSY" reply may be sent.
Meaning
No correction
Low memory color correction
Medium memory color correction
High memory color correction
6-axis adjustment
Input
Comp Video S-Video
○ ○ ○ ○
The color correction is set to "Medium memory color correction".
This retrieves the color correction method.
Mode
None Remote Local
×
○ ○
Mode Control Setting
Reference
ID