Canon SX50 - REALiS SXGA+ LCOS Projector Command Reference Manual page 36

Commands
WB
Function Screen color correction
Parameter None
Parameter
NORMAL
GREENBORD
ADJUST
The RANGE command can be used to obtain the parameter range that can be set at that time.
Response An 'i:OK' is returned after setting is successful.
Description The screen color correction is set to "Normal", "Blackboard", or "Adjust".
(1) This command is identical to the Screen color correction function in the Image adj. menu.
(2) When Adjustment (ADJUST) is selected, the R, G, and B adjustment values are set using the WBRGB
command.
(3) This sets the currently-selected input and image mode.
(4) The GET command can be used to retrieve the current screen color correction.
Example Control
> WB=NORMAL
<
i:OK
Reference
> GET WB or ?WB
< g:WB=GREENBORD
Obtain settable parameters
> RANGE WB
< r:WB=I,NORMAL,GREENBOARD,ADJUST
*Commands are indicated by ">", and responses are indicated by "<".
Supported Command States
Power supply
OFF ON PM D-RGB A-RGB1 A-RGB2
× ○ × ○ ○
※If a state is not supported, "INVALID_MODE" or "NOT_POWER_SUPPLIED" is returned with the Err response.
※When the power supply state is in the process of switching, an "i:BUSY" reply may be sent.
Meaning
Normal
Blackboard
Adjust
Input
Comp Video S-Video
○ ○ ○ ○
This sets the screen color correction to "Normal".
This retrieves the screen color correction.
Mode
None Remote Local
○ ○ ×
Mode Control Setting
Referenc
ID
e